Model # AWLH3025 User’s Manual Ver. 1A
- 6 - Step 7 Remove the Driver & Utility CD from your CD drive and then click OK to restart your computer.
- 7 - Install the device Note: Make sure the procedures in “Install the Driver & Utility” have been performed. In most cases, Windows will automa
- 8 - Note for Windows XP users: 1. Select Install the software automatically (Recommended) and click Next.
- 9 - 3. Click Continue Anyway at the Windows Logo testing screen. 4. Click Finish to complete the installation.
- 10 - Verify Device Installation To verify that the driver has been properly installed in your computer, go to Start Æ Settings Æ Control Panel
- 11 - CONFIGURATION After successfully installing the driver and utility, a Utility Icon will appear on the desktop. If the Utility Icon doesn’t
- 12 - Main Tab The Main tab displays the current status of the Wireless Network Adapter. Item Description External Configuration Uncheck the box to
- 13 - Item Description Mode Displays the type of connection: Access Point or Peer-to-Peer. Ch Displays the channel that is currently in use. Sign
- 14 - Preferred SSID Type in the SSID of the target device you want to connect to. BSS Type You can select the connection type: Peer-to-Peer, Acc
- 15 - Fragment Threshold You can fragment the MSDU or MMPDU into smaller sizes to increasing the reliability of frame transmission. (The maximum va
REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have e
- 16 - Advanced Tab The Advanced tab displays the current status of the Wireless Network Adapter. Privacy Tab Use the Privacy Tab to configure your
- 17 - Privacy Mode Choose either WEP or WPA mode and click Configure: (Note: CCX is not available for this adapter). WEP is a data security mecha
- 18 - WEP Configuration Authentication The authentication type defines ID verification and access privileges of roaming wireless network cards.
- 19 - keys, but only one can be used at a time. Encryption:Enter the key value in this field. A key of 10 hexadecimal characters (0-9, A-F) is requi
- 20 - Statistics Tab The Statistics Tab displays any available statistics including Receive packets, Transmit packets, Association reject packets, A
- 21 - About Tab Click on the About tab to view basic version information about the OS Version, Utility Version, Driver Version, Firmware Version and
- 22 - UNINSTALLATION If you need to uninstall the driver and utility, follow the steps below. (When you uninstall the utility, the driver will be un
- 23 - Appendix Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlinkplus.com
Table of Contents INTRODUCTION... 1 WIRELESS NETWORK OPTIONS ...
UNINSTALLATION ... 22
- 1 - INTRODUCTION The 802.11g Wireless LAN Card is a device that allows you to connect your computer to a Wireless Local Area Network (WLAN). A wire
- 2 - You can also use one computer as an Internet Server to connect to a wired global network and share files and information with other computers v
- 3 - LED Indicators For Wireless Network Adapter Card Power Indicator: (Green LED) This LED will illuminate when the driver is installed. Act Indica
- 4 - INSTALLATION Caution: Be sure to power off your computer before inserting the PCI adapter. Install the Driver & Utility Step 1 Insert the
- 5 - Step 4 When the welcome screen appears, click Next. Step 5 Click Next to accept the default destination folder to install the software or clic
Comments to this Manuals